Additional Information:

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.

Cross Reference

AS36C1216L 10630ANILLO INDUSTRIES, INC. DBA ANILLO INDUSTRIESC643C1216L 81755LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN AERONAUTICS

Restrictions/Controls & Freight Information

Shelf-Life Code:0Nondeteriorative Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. Controlled Inventory Item Code:UUNCLASSIFIED Precious Metals Indicator Code:AItem does not contain precious metal Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)

Management

Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.The price has not been analyzed or reviewed for accuracy.ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.Materiel Management Aggregation CodeSXSX:AF SICA RESIDUAL MMAC-OC-ALCSource of SupplySMSDefense Logistics AgencyEnterprise Business SystemsAgencyDFDepartment of the Air ForceService OrganizationFU.S. Air ForceReparabilityNStock Fund (except Munitions)Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition. Controlled Item CodeUUNCLASSIFIEDShelf Life Code0NondeteriorativePurchasingQTY UOM1 EA : Each

Please note all orders are subject to our confirmation prior to shipping.