Additional Information:

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.202259000005365000000

Cross Reference

360673, 59364HONEYWELL INTERNATIONAL INC. DBA HONEYWELL360673, 99193HONEYWELL INTERNATIONAL INC. DBA HONEYWELL

Restrictions/Controls & Freight Information

Shelf-Life Code:0Nondeteriorative Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. Controlled Inventory Item Code:UUNCLASSIFIED Precious Metals Indicator Code:AItem does not contain precious metal Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Management

Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.The price has not been analyzed or reviewed for accuracy.ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.Materiel Management Aggregation CodeSXSX:AF SICA RESIDUAL MMAC-OC-ALCSource of SupplySMSDefense Logistics AgencyEnterprise Business SystemsAgencyDFDepartment of the Air ForceService OrganizationFU.S. Air ForceReparabilityNStock Fund (except Munitions)Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. Controlled Item CodeUUNCLASSIFIEDShelf Life Code0NondeteriorativePurchasingQTY UOM1 EA : Each

Please note all orders are subject to our confirmation prior to shipping.