Additional Information:

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.

Cross Reference

13026309-4 18876U S ARMY AVIATION AND MISSILE COMMAND13026309-4 64059LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN MISSILES AND13026309-4 80378TRIUMPH AEROSTRUCTURES, LLC DBA TRIUMPH AEROSTRUCTURES - VOUGHT

Restrictions/Controls & Freight Information

Shelf-Life Code:0Nondeteriorative Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) Controlled Inventory Item Code:UUNCLASSIFIED Precious Metals Indicator Code:AItem does not contain precious metal Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)

Management

Materiel Category and Inventory ManagerT Industrial Supplies (DLA/GSA Items)Appropriation and Budget Activity2 Stock Fund Secondary ItemsManagement Inventory Segment2 NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.Specific Group/Generic Code0 Medical MaterielWeapons Systems/End Item or Homogeneous Group00DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End ItemAccounting Requirements CodeX Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.Source of SupplySMSDefense Logistics AgencyEnterprise Business SystemsAgencyDADepartment of the ArmyService OrganizationAU.S. ArmyReparabilityZThis is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item.Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition. Controlled Item CodeUUNCLASSIFIEDShelf Life Code0NondeteriorativePurchasingQTY UOM1 EA : Each

Please note all orders are subject to our confirmation prior to shipping.