NSN: 5340-00-395-6850 / O-RING
- Product Description
- Questions (0)
Product Description
Manufacturer | Part Number |
---|---|
UNITED TECHNOLOGIES CORPORATION DBA PRATT WHITNEY-SPARE PARTS DIVISION DIV SPARES/SUPPORT EQUIPMENT , 77445 | 4039804 |
TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP , 11449 | 4039804 |
Name | Value |
---|---|
OVERALL HEIGHT | 1.090 INCHES MINIMUM AND 1.110 INCHES MAXIMUM |
BODY OUTSIDE DIAMETER | 1.110 INCHES MINIMUM AND 1.120 INCHES MAXIMUM |
BODY INSIDE DIAMETER | 1.075 INCHES MINIMUM AND 1.089 INCHES MAXIMUM |
END HOLE DIAMETER | 0.770 INCHES MINIMUM AND 0.790 INCHES MAXIMUM |
MATERIAL | STEEL COMP 347 |
MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5512 ASSN STD SINGLE MATERIAL RESPONSE |
STYLE DESIGNATOR | PARALLEL |
III FSC APPLICATION DATA | ACFT ENG F-100 |
Additional Information:
Agency Usage | End Item Usage | Criticality |
---|---|---|
Army | AH-64-D LONGBOW | Critical Application |
A cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
Cross Reference
4039804 11449TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP4039804 77445UNITED TECHNOLOGIES CORPORATION DBA PRATT WHITNEY-SPARE PARTS
Restrictions/Controls & Freight Information
Shelf-Life Code:0Nondeteriorative Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. Controlled Inventory Item Code:UUNCLASSIFIED Precious Metals Indicator Code:UPrecious metal type is unknown Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Management
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.Materiel Management Aggregation CodeNZSX:PRATT & WHITNEY JET ENGINES & COMPONENTS, F-100???P-100Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.Price ValidationV The current standard price has been validated.The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.ZOP or Standard price challenges are permissible but must be supported by adequate justification.Source of SupplySMSDefense Logistics AgencyEnterprise Business SystemsAgencyDFDepartment of the Air ForceService OrganizationFU.S. Air ForceReparabilityNStock Fund (except Munitions)Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. Controlled Item CodeUUNCLASSIFIEDShelf Life Code0NondeteriorativePurchasingQTY UOM1 EA : Each
Please note all orders are subject to our confirmation prior to shipping.