NSN: 5340-00-199-3758 / O-RING
- Product Description
- Questions (0)
Product Description
Manufacturer | Part Number |
---|---|
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN AERONAUTICS DIV LOCKHEED MARTIN AERONAUTICS COMPANY , 98897 | 4G53516-101A |
Name | Value |
---|---|
THREAD CLASS | 3B ROD CONNECTION |
HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.252 INCHES MAXIMUM |
SHANK DIAMETER | 0.500 INCHES NOMINAL |
OVERALL HEIGHT | 0.500 INCHES NOMINAL |
END RADIUS | 0.310 INCHES NOMINAL |
METALLIC HARDNESS RATING | 24.0 MINIMUM ROCKWELL C AND 32.0 MAXIMUM ROCKWELL C |
FORK SPAN WIDTH | 0.345 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END | 1.375 INCHES NOMINAL |
FORK DEPTH | 0.680 INCHES NOMINAL |
NOMINAL THREAD SIZE | 0.250 INCHES ROD CONNECTION |
Additional Information:
Agency Usage | End Item Usage | Criticality |
---|---|---|
Air Force, Navy |
A forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.20210050018Guns, through 30mm53400020Hardware, Commercial
Cross Reference
4G53516-101A 98897LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN AERONAUTICS
Restrictions/Controls & Freight Information
Shelf-Life Code:0Nondeteriorative Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. Controlled Inventory Item Code:UUNCLASSIFIED Precious Metals Indicator Code:UPrecious metal type is unknown Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Management
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.Materiel Management Aggregation CodeSXSX:AF SICA RESIDUAL MMAC-OC-ALCPrice ValidationV The current standard price has been validated.The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.ZOP or Standard price challenges are permissible but must be supported by adequate justification.Source of SupplySMSDefense Logistics AgencyEnterprise Business SystemsAgencyDFDepartment of the Air ForceService OrganizationFU.S. Air ForceReparabilityNStock Fund (except Munitions)Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. Controlled Item CodeUUNCLASSIFIEDShelf Life Code0NondeteriorativePurchasingQTY UOM1 EA : Each
Please note all orders are subject to our confirmation prior to shipping.