NSN: 5340-00-124-6242 / O-RING
- Product Description
- Questions (0)
Product Description
Manufacturer | Part Number |
---|---|
METADURE PARTS & SALES, INC. DBA METADURE PARTS & SALES , 56190 | 101205-1 |
Name | Value |
---|---|
THREAD CLASS | 2B ROD CONNECTION |
THREAD DIRECTION | RIGHT-HAND ROD CONNECTION |
THREAD LENGTH | 0.880 INCHES NOMINAL ROD CONNECTION |
HOLE DIAMETER | 0.375 INCHES NOMINAL |
SHANK DIAMETER | 0.633 INCHES NOMINAL |
OVERALL WIDTH | 0.898 INCHES NOMINAL |
END RADIUS | 0.350 INCHES NOMINAL |
FORK SPAN WIDTH | 0.445 INCHES NOMINAL |
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END | 2.500 INCHES NOMINAL |
FORK ARM THICKNESS | 0.227 INCHES NOMINAL |
Additional Information:
Agency Usage | End Item Usage | Criticality |
---|---|---|
Multi Agency | NIMITZ CLASS CVN | Critical |
A forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.20210050018Guns, through 30mm53400020Hardware, Commercial
Cross Reference
101205-1 56190METADURE PARTS & SALES, INC. DBA METADURE PARTS & SALES
Restrictions/Controls & Freight Information
Shelf-Life Code:0Nondeteriorative Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. Controlled Inventory Item Code:UUNCLASSIFIED Precious Metals Indicator Code:AItem does not contain precious metal Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Management
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.The price has not been analyzed or reviewed for accuracy.ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.Materiel Management Aggregation CodeSXSX:AF SICA RESIDUAL MMAC-OC-ALCSource of SupplySMSDefense Logistics AgencyEnterprise Business SystemsAgencyDFDepartment of the Air ForceService OrganizationFU.S. Air ForceReparabilityNStock Fund (except Munitions)Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition. Controlled Item CodeUUNCLASSIFIEDShelf Life Code0NondeteriorativePurchasingQTY UOM1 EA : Each
Please note all orders are subject to our confirmation prior to shipping.