NSN: 5340-00-075-9425 / O-RING
- Product Description
- Questions (0)
Product Description
Manufacturer | Part Number |
---|---|
UNITED TECHNOLOGIES CORPORATION DBA PRATT WHITNEY-SPARE PARTS DIVISION DIV SPARES/SUPPORT EQUIPMENT , 77445 | 358451 |
UNITED TECHNOLOGIES CORPORATION DBA PRATT WHITNEY-SPARE PARTS DIVISION DIV SPARES/SUPPORT EQUIPMENT , 77445 | 491608 |
Name | Value |
---|---|
MOUNTING HOLE TYPE | PLAIN |
FIRST LEG LENGTH | 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
SECOND LEG LENGTH | 0.630 INCHES MINIMUM AND 0.670 INCHES MAXIMUM |
SECOND LEG WIDTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
SECOND LEG HOLE DIAMETER | 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
FIRST LEG THICKNESS | 0.051 INCHES MINIMUM AND 0.056 INCHES MAXIMUM |
SECOND LEG END RADIUS | 0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
SECOND LEG STYLE | END RADIUS |
Additional Information:
Agency Usage | End Item Usage | Criticality |
---|---|---|
Navy | AIRCRAFT, STRATOFORTRESS B-52 |
A ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.202534000005342000000
Cross Reference
358451, 77445UNITED TECHNOLOGIES CORPORATION DBA PRATT WHITNEY-SPARE PARTS491608, 77445UNITED TECHNOLOGIES CORPORATION DBA PRATT WHITNEY-SPARE PARTS
Restrictions/Controls & Freight Information
Shelf-Life Code:0Nondeteriorative Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) ??? MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is ???3??? and MUT is not required when the DEMIL IC is ???6.??? Controlled Inventory Item Code:UUNCLASSIFIED Precious Metals Indicator Code:AItem does not contain precious metal Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Management
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.The price has not been analyzed or reviewed for accuracy.ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.Materiel Management Aggregation CodeRUSX:PRATT & WHITNEY JET ENGINES & COMPONENTS, J-57Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.Source of SupplySMSDefense Logistics AgencyEnterprise Business SystemsAgencyDFDepartment of the Air ForceService OrganizationFU.S. Air ForceReparabilityNStock Fund (except Munitions)Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. Controlled Item CodeUUNCLASSIFIEDShelf Life Code0NondeteriorativePurchasingQTY UOM1 EA : Each
Please note all orders are subject to our confirmation prior to shipping.