AC Gearmotor 115 Nameplate RPM 135 RPM Max. Torque 65.0 in-lb Enclosure TEFC/ OVERALL HEIGHT: 6.250 INCHES OVERALL LENGTH: 12.000 INCHES OVERALL WIDTH: 6.750 INCHES KEYWAY WIDTH: 0.1880 INCHES NOMINAL SINGLE END KEYWAY DEPTH: 0.0940 INCHES NOMINAL SINGLE END SHAFT DIAMETER: 0.6250 INCHES NOMINAL SINGLE END CURRENT TYPE: AC INPUT KEYWAY LENGTH: 1.0000 INCHES NOMINAL SINGLE END SHAFT ROTATION DIRECTION: CLOCKWISE SINGLE END DUTY CYCLE: CONTINUOUS INCLOSURE FEATURE: TOTALLY INCLOSED WINDING TYPE: INDUCTION-SPLIT PHASE MOUNTING METHOD: FIXED BASE MOUNTING FACILITY TYPE AND QUANTITY: 4 UNTHREADED HOLE GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION: OFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END COOLING METHOD: AMBIENT AIR CURRENT RATING METHOD: LOAD TORQUE RATING AND TYPE: 3.5 INCH-POUNDS STARTING SPEED CONTROL METHOD AND DEVICE TYPE: AUTOMATIC MECHANICAL INCLOSURE SPECIFICATION: COMMERCIAL FEATURES PROVIDED: VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION POWER RATING: 0.1666 HORSEPOWER OUTPUT LENGTH OF SHAFT FROM HOUSING: 1.500 INCHES SINGLE END SHAFT CENTER TO MOUNTING SURFACE DISTANCE: 2.250 INCHES SINGLE END NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 3.125 INCHES NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH: 4.000 INCHES CURRENT RATING IN AMPS: 4.900 SINGLE OUTPUT CONNECTION TYPE AND VOLTAGE RATING IN VOLTS: 115.0 LINE TO NEUTRAL SINGLE INPUT GEARED HEAD OUTPUT SHAFT SPEED RATING: 135.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END ANGLE OF SHAFT TO MOUNTING BASE: 90.0 DEGREES SINGLE END SHAFT END CHARACTERISTIC: A9 SINGLE STYLE SINGLE END PHASE: SINGLE INPUT FREQUENCY IN HERTZ: 60.0 INPUT TERMINAL TYPE AND QUANTITY: 5 WIRE LEAD